acide bolted tanks

acide bolted tanks

acide bolted tanks are roasted at temperatures of about 900 degrees Celsius. After cooling, special enamel and steel plates are bonded together. As the linear expansion coefficient and elongation of the enamel is less than the steel plate, the deformation of the glass enamel after cooling is less than the deformation of the steel plate, so the enamel will be constrained by the steel plate to produce pressure stress.

When the acide bolted tanks is made, there is pre compression stress on the enamel layer, and the pre tension stress exists in the steel plate. Due to the correlation between the prestress and the coefficient of linear expansion and the elongation, the coefficient of linear expansion and the elongation are closely related to the temperature, so the working temperature of the enamel storage tank has a great influence on its use. Enamel will be destroyed if the stress generated by enamel is greater than the stress due to the large temperature change. The role of enamel tanks is mainly for the use of corrosive chemicals, such as various strong acids.

The enamel layer of acide bolted tanks is cold and hot, and it is extremely explosive. Therefore, the enamel storage tank has a temperature limit, the maximum temperature should not be higher than 200 C, temperature rapid change cold shock resistance less than 110, thermal shock less than 120. Storage material temperature and tank temperature difference is too big, and heating up steam too fast, cooling too fast can also cause porcelain. Therefore, the liquid should not be brought to a larger temperature difference, otherwise it will damage the tank.

acide bolted tanks have very poor impact resistance. Any metal or hard objects will cause damage to enamel when they are struck. Therefore, in the process of using the enamel storage tank, any metal and hard material will fall into the cauldron. If the material is blocked, it is necessary to use plastic bars to dredge, cover the cover of the pot when overhauled, and to prevent the appearance of small pits or explosive porcelain in the melting porcelain surface.

acide bolted tanks are a kind of jar that is painted on inorganic glass enamel on the surface of metal billet.

Enamel is actually a kind of composite material which solidifies inorganic glassy material on the base metal by melting and solidifying.

Bolted Steel Storage Tanks

The enamel coating on the metal surface prevents the metal from rusting and prevents the metal from forming the oxide layer on the surface and resisting the erosion of various liquids. Enamel products are not only safe and non-toxic, easy to wash and clean, and can be widely used as eating utensils and washing utensils used in daily life, and under specific conditions, enamel coating has high hardness, high temperature resistance, abrasion resistance and insulation, which makes the enamel products more extensive. General use. The glaze layer can also give the products beautiful appearance and decorate people's lives. It is evident that enamel ware combines the strength of the metal and the gorgeous appearance of the glaze and the resistance to chemical attack.

acide bolted tanks

It is also a kind of container, which can be divided into many kinds, such as glass cans, tin cans, plastic cans, enamel pots and so on. Enamel is a kind of composite material which melts and solidifies inorganic glassy material on the base metal and bonds firmly with the metal. The enamel can be called enamel pots, which is not suitable for breaking and is suitable for household use.

Keep the original packaging as far as possible when handling the 5000L reactor. When handling unpacked equipment, attention must be given to the force of rings, canister ears and supporting legs on the equipment. It should be light and light to avoid collision and vibration.

In hoisting, in addition to observing the matters needing attention during handling, we must prevent collisions. More than three positioning control measures must be taken to ensure the stability of the crane when it is easy to collide.

acide bolted tanks should be inspected before and after installation. The equipment for porcelain surface damage should be treated effectively before it can be used, otherwise it should not be installed. The method of examining porcelain surface is to inspect the porcelain surface with high frequency electric spark generator and take 60 watts of safety light to check if porcelain and fracture are removed. Note: when using an electric spark generator to detect, the voltage is generally controlled at 5000 volts. When an important equipment needs to increase the detection voltage, it must obtain the consent of the manufacturer.

Bolted Steel Storage Tanks price