bolted steel tank design

bolted steel tank design introduce

bolted steel tank design is a new and high technology, which is made of flexible enamel steel plate and spliced by bolting.

bolted steel tank design takes 500 m3 enamel anaerobic tank as an example. The diameter of the tank is 9 170 mm, the height of the tank is 8 400 mm, and the volume of the tank is 554 m3. The actual usable volume is 500 m3.In the past 1997~2002 years, the technology has been introduced into China and has been successfully developed and created by domestic materials.

bolted steel tank design is to select high quality materials and sinter the enamel at high temperature to form a dense glaze layer on the surface of the water tank. The ion permeates each other between the water tank and the steel plate. It is not easy to deform, resist earthquake and have impact resistance.

bolted steel tank design concave convex surface, concave convex surface design is to increase the stiffness of the enamel plate, such as:

Bolted Steel Storage Tanks

a common A3 paper folded into a W-serrated shape combination, two ends on two objects, the middle space, like a bridge, can be placed on top of something, the same A3 paper can not bear Some heavier objects. The W sawtooth combination of A3 paper can withstand slightly heavier objects.

This shows that the enamel steel plate tank has concave convex surface, that is the reason.

NVirotech Environmental Protection Co Ltd is an intensive company engaged in the research, development, design and ecological agriculture of large-scale biogas power generation projects and biogas projects. The company is committed to the development of environmental protection, energy, science and technology, production, installation, technical support and other integrated enterprises.

enamel assembled tank

The company's main products are: large-scale biogas power generation project, enamel steel plate, enamel assembly tank, enamel steel plate assembly tank, enamel assembly seawater desalination series treatment tank, architectural decoration enamel steel plate, solid-liquid separator, desulfurization tower, dehydration tower and a variety of enamel plate water treatment reactors, etc.

At present the company has large-scale domestic enamel steel. Plate production line, the output of the leading domestic counterparts, excellent technology, high quality, can fully meet customer needs.

bolted steel tank design technical requirement

bolted steel tank design technical requirement for enamel tank shall meet the requirements of this standard and be manufactured according to the required drawing requirements and dimensions.

bolted steel tank design by enamel pot is welded, the firmware must not be loosened, and the connectors must not be welded or leaked.

bolted storage tank design

bolted steel tank design tank weld to be full, tank outer welding surface to be smooth, beautiful, no slag, no welding nodules, no pores, no cracks.The welding interface can not be cracked or separated, and there must be no cutting hands. The weld inside the tank should be polished.

The flat bottom plate of the water tank should be kept flat and the degree of deformation should be satisfied.

Tank top and manhole must be fully welded.

The connection of the water tank must be well welded and kept as perpendicular as possible, at least tilting less than 1 degree 1°%.

For dimensional tolerances, the following requirements should be met. The tank should not be filled with water, and there should be no seepage or leakage, and there should be no obvious deformation.

Food storage tank

The tank should be filled with water according to the relevant experimental clauses of steel welded atmospheric pressure vessel. The actual capacity of the water tank should be no less than the nominal volume.