2018-07-15 21:43:33 By:NVirotech Bolted Tank (1820)
bolted tank are environmentally friendly products. They are very popular all over the world. Let's introduce our bolted tank agent in indonesia.
bolted tank agent in indonesia by Shijiazhuang Zheng Zhong Technology Co., Ltd. is made up of special steel plate, special sealing material, self locking bolt and so on. It has been used for up to 30 years. After preprocessing, the special steel plate is coated with two to three layers of enamel coating on both sides of the inside and outside. After heating and polymerization, the coating and the steel plate can form a strong binding force. The protective layer formed by the coating not only can prevent the corrosion of the tank, but also has strong anti acid and strong alkali function and strong wear resistance.
bolted tank agent in indonesia is a special titanium alloy plate, which is two times the strength of ordinary steel plate, and the thickness of commonly used storage steel plates is from 3mm~8mm. The inner and outer surfaces of the steel plate are sprayed with the bottom glaze and the surface glaze. After drying, the steel plate is heated by 900 degrees centigrade to form a 0.3mm thick enamel coating. The enamel coating not only prevents the corrosion of the tank, but also has the function of resisting strong acid, strong alkali, and has very strong wear resistance. The corrosion resistance of enamel plate is very suitable for application in the field of biogas energy, the splicing between steel plates, the form of the steel plate and the self locking bolt connection. The special sealing material is embedded in the overlap between the two plates, which has reached the requirement of fast and low consumption.
bolted tank agent in indonesia roof can maintain the pressure of 5kpa, and the tank can also be combined with the membrane methane storage cabinet to form an integrated device for fermentation gas production and gas storage. The company can assemble enamel steel plates into 20~3000m3 tanks of different sizes according to the needs of customers. It is convenient for customers to use. It can be used for sealed storage of gas, liquid and solid in sewage treatment, biogas engineering, grain storage, petrochemical industry and other industries. In biogas projects, assembly tanks are containers for storage and fermentation of various organic substances, such as animal waste, sewage, straw and other fermented raw materials.
The bolted tank agent in indonesia is to coat the porcelain glaze with high silicon content on the metal surface and to heat it through 950 degrees to make the glaze close to the surface of the metal tyre. Therefore, it has the double advantages of chemical stability and metal strength similar to glass.
bolted tank agent in indonesia is widely used in chemical, pharmaceutical, dyestuff, pesticide, organic synthesis, oil, food manufacturing and national defense industry and other industrial production and scientific research, such as reaction, evaporation, concentration, synthesis, extraction, polymerization, saponification, mineralization, chlorination, nitrification, in place of expensive stainless steel and non-ferrous metals. Corrosion resistance: for all concentrations of inorganic acids, organic acids, organic solvents and weak alkali and other media have strong corrosion resistance. But for strong base, hydrofluoric acid and fluoride medium, and temperature greater than 180 degrees, concentration of more than 30% phosphoric acid is not applicable.
Factory processing products require very high quality products. If there is an unqualified product, it will result in overall scrap. Therefore, factory processing products must strictly abide by the rules and reduce unnecessary losses. Yang Yang chemical works to share with you how to reduce unnecessary loss of glass lined equipment.
For the strong corrosion or high temperature medium to join the pipe mouth, to prevent the tube lining glass layer from high temperature medium explosion porcelain, the best use of tetrafluoroethylene, ethylene plastic processing a protective sleeve, suit on the inner wall of the pipe, glass lining equipment should be as little as the design of the mouth. The structure of the nozzle is complex, which causes the porcelain surface to burst. The pipe mouth should be designed on the hole cover, once the damage, the replacement cost of the cover is very low; for the inlet and outlet pipe mouth which often needs disassembly and disassembly, one glass lined short pipe should be added to the inlet and outlet pipe, one end of the short pipe is connected with the glass lining and the other end is connected with the pipe, so that the regular disassembly pipe can be avoided. For the large specification of glass lining equipment, manholes must be equipped with manhole protection ring; when the inspection and maintenance personnel are in and out of the equipment, when the instruments and tools are handed in, the manholes will be damaged by carelessness, and the manhole glass surface is seriously scratched or damaged, and the manhole protection ring should be used to protect the manhole. The renewal cost of the manhole protection ring is much lower than that of the whole equipment.
To do the above measures, the loss can be reduced effectively. In fact, the most important thing is to be careful and follow the rules of procedure. Doing well in the above aspects can not only reduce losses, but also improve work efficiency and reduce costs, to a certain extent, promote enterprise development.
write down your requirement and contact details in the following form to get the latest price of this product within one day!
Hi, we intend to sell this website, if you are interested, please contact us:
Email:529733977@qq.com